FLOPLAST 50mm x 32mm Grey Pushfit Waste Pipe Reducer

Product Information

relates to the length of the slope, therefore the horizontal projection will vary dependant on the selected roof pitch. The Evolution Canopy is an exciting new system, encompassing a modern design with clean sight lines providing ease of installation. The size of push fit waste fittings is based on the nominal inside bore of the pipe they are used with. Connections: Push-Fit Spigot (fits into another push-fit socketed pipe, fitting or connector) x Push-Fit Socket; NOT suitable for solvent welding. Made from tough and long-lasting polypropylene, our MDPE fittings utilise an acetal grip ring and a Nitrile rubber O ring.

This push fit waste system is manufactured in the UK to BS EN 1451 and is British Standard kitemarked. We’ve recently updated our Privacy Policy to give you more detailed information about your rights and how we use your data. If a signature cannot be obtained, we will try to leave the goods in a safe location, but we cannot be held responsible for shortages or damages where goods have not been signed for. The 50mm x 32mm FloPlast ABS Solvent Waste Reducer connects two pipes of different diameters (50mm and 32mm), ensuring cohesion across your drainage system.Please be aware that on occasion fittings may vary from the colour and design in the image above, regardless of this, they will be of the same size, and will be WRAS approved. The kits are supplied with all the fixings and sealants required for a standard installation and also includes a comprehensive fitting guide.

All of our MDPE fittings can be used on either blue (potable) MDPE pipe or black (non-potable) MDPE pipe. Units 3-5 Britannia Trade Park, Ryehill Close, Lodge Farm Industrial Estate, Northampton, NN5 7UA We provide high quality products from leading UK and European manufacturers. A leading supplier of plumbing fittings, McAlpine comes with a variety of high-quality and competitive products to suit all plumbing solutions.

When using solvent cement, always work in a well ventilated area and keep the cement away from heat sources or naked flames.

The joint can be taken apart again if required, but always check that the O ring has not been dislodged from its housing groove in the fitting as this will cause the joint to leak. Years Guaranteed 10 Type Reducer Thread Size 1 1/4 inch Suitable for Plastic waste pipes, copper pipe and lead pipe Material Polypropylene Diameter 50.This waste reducer is used when a 32mm waste pipe is connected into a 50mm pipe, usually with the 32mm pipe dropping into the 50mm pipe below it running towards the soil pipe. As well as the standard lean too configuration the system can be specified as a gable roof design with the wall plates bolted back to back to form a ridge supported between two host walls or as a fee standing option supported on posts.